High Speed Steel Hand Taps with straight flutes are designed for general purpose hand tapping or in production machines where ground thread accuracy and performance are required. They are suitable for tapping most materials in through or blind holes. Hand taps retain chips in the flutes during use and work best on materials that produce chips and the swarf breaks easily.
Size | Pitch | Total Length | Thread Length | Size | Pitch | Total Length | Thread Length | Size | Pitch | Total Length | Thread Length | ||
M1 | 0.25 | 32 | 5.5 | M4.5 | 0.75 | 50 | 14 | M24 | 3 | 110 | 50 | ||
M1.1 | 0.25 | 32 | 5.5 | M5 | 0.8 | 50 | 14 | M27 | 3 | 110 | 50 | ||
M1.2 | 0.25 | 32 | 5.5 | M5.5 | 0.9 | 50 | 16 | M30 | 3.5 | 125 | 56 | ||
M1.4 | 0.3 | 32 | 7 | M6 | 1 | 50 | 16 | M33 | 3.5 | 125 | 56 | ||
M1.6 | 0.35 | 32 | 8 | M7 | 1 | 50 | 18 | M36 | 4 | 150 | 63 | ||
M1.7 | 0.35 | 32 | 8 | M8 | 1.25 | 56 | 22 | M39 | 4 | 150 | 63 | ||
M1.8 | 0.35 | 32 | 8 | M9 | 1.25 | 63 | 22 | M42 | 4.5 | 150 | 63 | ||
M2 | 0.4 | 36 | 8 | M10 | 1.5 | 70 | 24 | M45 | 4.5 | 160 | 70 | ||
M2.2 | 0.45 | 36 | 9 | M11 | 1.5 | 70 | 24 | M48 | 5 | 180 | 75 | ||
M2.3 | 0.4 | 36 | 9 | M12 | 1.75 | 75 | 29 | M52 | 5 | 180 | 75 | ||
M2.5 | 0.45 | 40 | 9 | M14 | 2 | 80 | 30 | M56 | 5.5 | 200 | 85 | ||
M2.6 | 0.45 | 40 | 9 | M16 | 2 | 80 | 32 | M60 | 5.5 | 200 | 85 | ||
M3 | 0.5 | 40 | 10 | M18 | 2.5 | 95 | 40 | M64 | 6 | 220 | 90 | ||
M3.5 | 0.6 | 45 | 12 | M20 | 2.5 | 95 | 40 | M68 | 6 | 220 | 90 | ||
M4 | 0.7 | 45 | 12 | M22 | 2.5 | 100 | 40 | M72 | 6 | 220 | 90 |